ETIC 1230 Manual do Utilizador descarregar pdf (Página 49)

CONFIGURATION

Industrial router IPL-E User guide ref. 9015909-03 Page 49

Remark :

It is not necessary to enter in the router R2 the static route to the WAN

network nor to the remote LAN network, that routes have been

automatically created by the router respectively when the WAN IP address

has been entered and when the VPN has been configured.

To set a static route,

•

••

•

Select the “Configuration” menu, the “network” menu the “Routing”

menu and then “Static routes”.

•

••

•

click the “Add a route” button.

“Destination IP address”

& “netmask” parameters :

Enter the destination network IP address and netmask.

“Gateway IP address” parameters

Enter the Ip address of the gateway through which the IP packets intended

for that network must pass.

11.3 RIP protocol

RIP (Routing Information Protocol) is a routing protocol which enables

each router belonging to a network to acquire the routes to any subnet.

The principle is as follows :

Routing table

Each router holds a routing table.

Each entry of the table consists in the destination subnet address and the

adjacent router address leading to that subnet.

Routing table broadcasting :

Each router broadcasts its table.

Routing table update :

Each router updates its own table using the tables received from the other

ones.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 105 106

Sem comentários

ETIC 1230 Manual do Utilizador Página 49