ETIC 1230 Manual do Utilizador descarregar pdf (Página 24)

CONFIGURATION

Page 24 User guide ref. 9015909-03 Industrial router IPL-E

2 Configuring the IPL-E router

2.1 Overview

Administration server address :

The administration html server is located at the LAN IP address of the router (The default

address is192.168.0.128).

First setup :

For the first configuration, we advise to connect the PC directly to the LAN interface of the

IPL-E router.

Setup modifications :

Modifications can be carried out from the LAN interface, or from the Internet if a firewall

rule authorises to reach the administration server (not advised), or from the Internet or

using a remote user connection or a VPN.

Restoring the factory IP address :

The factory IP address of the router on the LAN interface can be restored by setting the

DIP switches SW01 ON and SW02 OFF.

In that position o the DIP switches, the stored configuration is not deleted.

Setting the DIP switches in that position gives also a free access to the administration

server from the LAN interface.

During operations, the DIP switches must not be left in that position.

Network IP address :

Later in the text, we often speak of “network address”.

We mean the lowest value of the addresses of the network.

For instance, if the netmask of a network is 255.255.255.0, the network address of that

network is X.Y.Z.0.

Copy and paste :

Parameters must be entered with the keyboard; they cannot be pasted.

However, it can be useful to paste a string when it is long to avoid errors.

In that case, paste the string, delete the last character of the pasted string, and enter it

again with the keyboard.

Saving and restoring the parameters file (see the maintenance chapter)

A parameters file can only be downloaded to a product having the same firmware version.

It is why, we advise to assign a name to a parameter file including the product name and

the software version like for instance “myrouterfile_iplE1220_V241.bin”.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 105 106

Sem comentários

ETIC 1230 Manual do Utilizador Página 24