ETIC 1230 Manual do Utilizador descarregar pdf (Página 19)

INSTALLATION

Industrial router IPL-E User guide ref. 9015909-03

Page 19

1.3 DIP-switches & push-button

DIP switches

SW 1 SW 2

Management

OFF OFF

The current IP@ of the product is the stored IP @

ON OFF

The active IP@ of the product is the factory IP@ : 192.168.0.128

No login and password are required to access to the html server.

OFF ON

The active IP@ is provided by the BOOTP or DHCP server.

ON ON

Reserved

Push-button : It enables to restore the factory profile.

To restore the factory profile, switch the power on while pressing the push-

button until the RUN light turns green.

Attention : Once the factory profile has been restored, the stored

configuration is lost.

2 Ventilation

To avoid overheating when the ambient temperature is high, leave a 1 cm

(0.5 inch) space on each side of the product.

3 Supply voltage

The supply voltage must be strictly lower than 30 VDC and higher than 10

VDC. The consumption is 170 mA at 24 VDC.

4 Ethernet ports

The IPL-E features auto-sensing 10/100 Mbps MDI/MDI-X LAN ports.

The upper RJ45 Ethernet connector is the interface on which safe VPN

links can be set. It is named the WAN interface.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 105 106

Sem comentários

ETIC 1230 Manual do Utilizador Página 19