ETIC 1230 Manual do Utilizador descarregar pdf (Página 28)

CONFIGURATION

Page 28 User guide ref. 9015909-03 Industrial router IPL-E

4 Recovering the factory LAN IP address

When launching the html browser, the homepage of the html server may

not be displayed; the cause may be the IP address you entered was

wrong.

if the IP address you enter is wrong, you can recover the factory IP

address by setting SW01 ON and SW2 OFF.

The factory IP address 192.168.0.128 will be restored as long as the

SW01 and SW02 micro switch will be left in that position.

Remark :

The SW01 and SW02 must not be left in that position during operations.

5 Recovering the factory configuration

If firewall rules have been created finally preventing from reaching any IP

address on the LAN interface including the router itself, it may be

necessary to restore the factory configuration of the router.

To restore the IPL-E factory configuration,

•

••

•

Switch OFF the power supply of IPL-E router.

•

••

•

Press the push button on the top part of the IPL-E router and switch

ON the power supply.

•

••

•

Keep the push button pressed until the operation led turns red.

Remark : The stored configuration will be lost; the factory IP address

192.168.0.128 will be restored.

6 Restricting access to the administration server

The access to the administration server can be protected by a login and

password.

To protect access to the administration server,

•

••

•

Select the “Setup” menu, the “Security” menu and then the

“Administration menu”.

Remark : For more simplicity, we advise to chose the login and the

password of one of the remote users stored in the user list.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 105 106

Comentários a estes Manuais

Sem comentários

ETIC 1230 Manual do Utilizador Página 28

Comentários a estes Manuais

Manuais e produtos relacionados com Redes ETIC 1230