ETIC 1230 Manual do Utilizador descarregar pdf (Página 32)

CONFIGURATION

Page 32 User guide ref. 9015909-03 Industrial router IPL-E

9.2 LAN interface IP parameters

9.2.1 IP addresses

To set up the LAN interface IP parameters,

•

••

•

Click the « Configuration» menu and then « LAN interface» and

then “IP protocol”.

“IP address” parameter :

Enter the IP address assigned to the router over the LAN interface.

That IP address will have to be entered to display the administration server

of the router.

”Netmask” parameter

Enter the IP netmask assigned to the LAN

“Start of users IP address pool” & “end of users IP addresses pool” parameters :

That parameters define the pool of addresses which will be assigned

automatically to remote user’s PC when they will connect to the router.

Enter the start address and the end address.

Remark :

After the LAN IP address of the router has been modified, it is necessary to reboot the unit.

If VPNs have been created, they must be launched again after the LAN IP address has

been modified.

To launch the VPNs again after the LAN IP address has been modified,

•

••

•

Select the « network» menu and then the « VPN » menu,

•

••

•

Click the « Properties » button in front of the « type of VPN » field, and

then on the “OK” button of the window entitled« VPN properties».

•

••

•

Click the « Modify » button in front of the « VPN connection » field, and

then on the “OK” button.

If the DHCP server is used, it must be launched again after the LAN IP address has been

modified.

To launch again the DHCP server after the LAN IP address has been modified,

•

••

•

Select the « LAN interface» menu and the «DHCP server» menu,

•

••

•

Unselect the « Enable the DHCP server» checkbox, and then select it again.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 105 106

Comentários a estes Manuais

Sem comentários

ETIC 1230 Manual do Utilizador Página 32

Comentários a estes Manuais

Manuais e produtos relacionados com Redes ETIC 1230