ETIC 1230 Manual do Utilizador descarregar pdf (Página 35)

HTML SET UP & DIAGNOSTIC

12 Two twisted pairs SHDSL connection set up

When two XSLANs SHDSL switches are connected through a 2 twisted

pairs line,

up to 4,6 Mb/s instead of 2,3 Mb/s can be provided;

The data flow is automatically shared over the two pairs;

both ports of the XSLAN Nr 1 have to be set as a LTU (calling party)

and both ports of the other one have to be configured as an “NTU”.

(called party).

12.1 SHDSL port set up

Once the XSLANs will have been set

up, they must be connected to the

line according to the drawing

opposite.

Setting up The XSLAN Nr 1

• Select the Ethernet & switching” menu and then the “SHDSL port” menu.

• Select the LTU checkbox for both port 1 and 2.

• Select the data rate according to the table of the appendix 1 for both port 1 and 2.

Note : If the “auto” option is selected, it will cause the XSLAN to try all the

data rates. The connection delay will be long. Moreover, the XSLAN

software will select a cautious solution. It is why the “auto” option will

be selected only if the distance is short (less than, 1 Km).

• Select the “Signal power” value “Auto”.

• Select the “SHDSL ports aggregation” checkbox.

• Save and click the reboot button.

XSLAN SHDSL switch User’s guide ref 9014709-02

Page 35

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 63 64

Sem comentários

ETIC 1230 Manual do Utilizador Página 35