ETIC 1230 Manual do Utilizador descarregar pdf (Página 21)

DIP-SWITCHES SET UP

1 Overview

The XSLAN can be configured either with DIP switches or with an html

browser through Ethernet.

The DIP switch configuration is very simple; it will be preferred when the

distance is under the limit of the product and when only simple functions

are required.

The Html server set up is mandatory

when the distance between two SHDSL switches is close to the limit

to take advantage of the Diagnostic functions,

or when advanced functions like VLAN, Quality of Service, serial

gateways, which can only be configured with the html server, are

required.

2 One twisted pair SHDSL line setup

When two XSLAN SHDSL switches a

connected through a 1 twisted pair line,

the port of the first one has to be set as

an LTU (calling party) and the port of

the other one has to be configur

an NTU (called party).

ed as

The SHDSL switch port which is named LTU negotiates and forces the

data rate over the line; the NTU can only accept.

The data rate can be either negotiated by the LTU itself (auto mode) , or

imposed by the user with the DIP switches.

Switch Shdsl XSLAN Notice d’utilisation ref 9014309-01

page 21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 63 64

Sem comentários

ETIC 1230 Manual do Utilizador Página 21